EKI-9502G Series User Manual
25
3.3
Interface
3.3.1
LAN
To access this page, click
Interface
>
LAN
.
Figure 3.5 Interface > LAN
The following table describes the items in the previous figure.
Item
Description
LAN Interface Setup
Local Hostname
Enter the device name: up to 31 alphanumeric characters.
Domain Name
Enter the name to be assigned for the interface domain.
Protocol
Click the drop-down menu to assign the type of protocol to the
interface: DHCP Client or Static.
IP Address
Static Protocol Only:
Enter a value to specify the IP address of the interface. The default
is 192.168.1.1.
Subnet Mask
Static Protocol Only:
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Subnet Mask
Static Protocol Only:
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
DHCP Server
DHCP Server
Click to enable or disable the DHCP server function.
Start IP Address
Enter the starting IP address of the DHCP pool.
Pool Counter
Enter the value to define the number of allowed DHCP leases.