Advantech EKI-7720 Series, User Manual

Page: 90 / 175

EKI-7720 Series User Manual 75
To access this page, click L2 Switching > Loopback Detection > Port Settings .
Figure 4.96 L2 Switching > Loopback Detection > Port Settings
The following table describes the items in the previous figure.
The ensuing table for Loopback Detection Port Information settings are informa -
tional only: Port, Enable State and Loop Status.
4.5.14 ERPS
4.5.14.1 ERPS Settings
To access this page, click L2 Switching > ERPS > ERPS Settings .
Figure 4.97 L2 Switching > ERPS > ERPS Settings
The following table describes the items in the previous figure.
The ensuing table for Information settings are informational only: ERPS State.
Item Description
Port Select Enter the port to define the local loopback detection setting.
Enabled Select Enabled or Disabled to setup the Loopback Detection func -
tion.
Apply Click Apply to save the values and update the screen.
Item Description
State Click Enabled or Disabled to enable ERPS settings.
Apply Click Apply to save the values and update the screen.