Advantech EKI-7529MI, User Manual, Page: 16 / 27

Chapter 2 Installation
In this chapter, you will be given an overview of the EKI-7529MI, EKI-7529MI/ST
hardware installation procedures.
2.1 LED Indicators
There are few LEDs display the power status and network status located on the front
panel of EKI-7529MI, EKI-7529MI/ST, each of them has its own specific meaning as
the table below.
Table 2.1: EKI-7529MI, EKI-7529MI/ST LED Definition
LED Color Description
On Power input 1 is active
PWR1 Green
Off Power input 1 is inactive
On Power input 2 is active
PWR2 Green
Off Power input 2 is inactive
On Power input 1 or 2 is inactive
P-Fail Red
Off Power input 1 and 2 are both active, or no power input
On Connected to 100 Mbps network
Flashing Data is transmitting or receiving
Link/Active
(9, 10)
Green
Off Not connected to 100 Mbps network
On Connected to network
Flashing Networking is active
Link/Active
(1~8)
Green
Off Not connected to network
On Ethernet port full duplex
Flashing Collision of packets occurs
Duplex/Collision
(1~8)
Yellow
Off Ethernet port half duplex or not connect to network
Table 2.2: EKI-7529MI, EKI-7529MI/ST DIP Definition
DIP Function Description
On 10M Full Force
DIP 1(Port 1 and
Port 2)
10Mbps
Off 10M Full Auto-Negation
On
Broadcast Storm Filter Enable
3000pps@64bytes(2.02Mbps) for 100Mbps and
240pps@64bytes(0.16Mbps) for 10Mbps
DIP 2
Broadcast
Storm
Filter
Off Broadcast Storm Filter Disable
EKI-7529MI_7529MIST_Manual_ed4 8