Advantech EKI-7526MI, User Manual

Page: 23 / 27

2.4 Network Connection
The EKI-7526MI has 16 x RJ-45 ports that support connection to 10 Mbps Ethernet, or
100 Mbps Fast Ethernet, and half or full duplex operation. EKI-7526MI can be
connected to other hubs or switches via a twisted-pair straight-through or crossover
cable up to 100m long. The connection can be made from any TX port of EKI-7526MI
(MDI-X) to another hub or switch either MDI-X or uplink MDI port. Besides, EKI-7526MI
provides 2 x SC type fiber ports for long distance uplinks up to 30km (single mode).
EKI-7526MI supports auto-crossover to make networking more easy and flexible. You
can connect any RJ-45 (MDI-X) port on the switch to any device such as a switch,
bridge or router.
2.5 Power Connection
The EKI-7526MI supports dual +12 ~48 V
DC
power inputs and power-fail relay output.
Figure 2.8: Pin Assignment of the Power Connector
You can connect an alarm indicator, buzzer or other signaling equipment through the
relay output. The relay opens if power input 1 or 2 fails (‘Open’ means if you connect
relay output with an LED, the light would be off).
15