19
The installer may adjust the Ethernet cable length according to the requirement of
installation in field.
Special Notice for Waterproof Installation
Most of the problems for outdoor models are from the connector connections that loosen over time due to
vibration or other forces, even allowing moisture to penetrate the connector and seriously affecting the
data and radio signal transmit. The following recommendation is used for all outdoor installation to be
waterproofed.
Step1: Ensure fasten all connectors securely together.
Step2: Tightly wrap a layer of self-bonding insulating tape (tapes from well-known brands are
recommended) forward and backward over the physical connection extending 2 inches beyond the
connectors or the end of heat-shrinkable tubing on the RF coaxial cable or omni-antenna connector, and
overlapping the tape on each turn.
Wrap a layer of insulating tape
on connectors to ensure
waterproof
Wrap insulating tape around
PoE cable connector and put
the cap on console connector
RF extend cable
connection
