EKI-4524ARI Power Input Wiring
1. Insert DC power wires into the contacts.
Pin 5:
Negative
Pin 6:
Positive
Pin 3 & 4: P-Fail Contacts
Pin 1 & 2: NC
Figure 2.11: Power Contacts of the Terminal Block
2. Tighten the wire-clamp screws to prevent the wires from loosing.
Note
•
Use Copper Conductors Only, 60/75
°
C, tightening to 5 lb-in
.
•
The wire gauge for the terminal block should be in the range between
12~ 24 AWG.
15 Chapter2
