41
EKI-1242 Series User Manual
3.4
Serial Settings
3.4.1
Port
To access this page, click
Serial Settings
>
Port 1/Port 2
.
The following figure displays the menu as found in the EKI-1242ECMS/EKI-
1242IECMS, EKI-1242EIMS/EKI-1242IEIMS, EKI-1242PNMS/EKI-1242IPNMS and
EKI-1242BNMS/EKI-1242IBNMS port 2 (Modbus).
,
Figure 3.16 Serial Settings > Port 1/Port 2
The following table describes the items in the previous figure.
Item
Description
Type
Click the drop-down menu to select a serial interface: RS232, RS422
or RS485.
Baud Rate
Enter a value to specify the baud rate. The value should conform to
the current transmission speeds of connected devices when setting
the baud rate.
Parity
Click the drop-down menu to select the parity: None, Odd, Even, Mark
or Space.
Data Bits
Click the drop-down menu to select the data bits: 5, 6, 7, or 8.
Stop Bits
Click the drop-down menu to select the stop bits: 1, 1.5 or 2.
Flow Control
Click the drop-down menu to select the flow control mode: None,
XOn/XOff or RTS/CTS.
Submit
Click
Submit
to save the values and update the screen.
