EKI-1221IEIMB | PNMB User Manual
17
3.1
Overview
An EKI modbus gateway can be configured through a web interface. In the browser’s
address field, enter the IP Address of your EKI protocol gateway. The default IP
setting is 192.168.1.1. Once the IP is entered, the following window displays.
Figure 3.1 Default Login Screen
3.2
Accessing the Web Page
Once the device is installed and connected, power on the device. The following
information guides you through the logging in process.
1.
Launch your web browser on the PC.
2.
In the browser’s address bar, type the device’s default IP address (EKI-
1221IEIMB: Modbus/TCP: 192.168.1.1 Ethernet/IP: 192.168.1.1; EKI-
1221IPNMB: Modbus/TCP:192.168.1.1 PROFINET: 0.0.0.0).
The main interface window displays.
Figure 3.2 Default Login Screen
Note!
Before using the web-based configuration, make sure your host PC is
on the same local network as the protocol gateway. Otherwise a con-
nection can not be established between both devices.
Note!
It is recommended that you use Microsoft Internet Explorer 7.0 or later
versions.