Advantech EKI-1200-CE Series, User Manual

Page: 57 / 67

47 EKI-1200-CE Series User Manual
These are the options for Modbus Slave Mode.
Figure 4.7 Port Configuration > Operation > Modbus Slave Mode
The following table describes the items in the previous figure.
Item Description
Mode Click the drop-down menu to select the port configuration mode:
Modbus Slave Mode or Modbus Master Mode.
Protocol Select the protocol of the Slave Mode or Master Mode (RTU or
ASCII).
Slave Timeout (ms) Specify the time duration in milliseconds for the EKI-1200-CE
Series to wait for a response after it has issued a command while
using Modbus/RTU or Modbus ASCII. After the timeout is expired
and no response is received, the EKI-1200-CE Series will regard
the command as failed. Note that the timeout for the host PC must
be greater than the timeout setting here specified, otherwise an
error will occur.
Delay Timeout (ms) Enter a value to specify the delay timeout.
ASCII Timeout (ms) Enter a value to specify the ASCII timeout.
Peer Number Click the drop-down menu to select the number of network device
which you want to connect.
Save Click Save to save the values and update the screen.