Advantech ECU-4553 Series, User Manual

Page: 11 / 26

3 ECU-4553 Series User Manual
C
ha
pte
r 1
In
tro
du
ctio
n
1.2.5 Environment

Humidity: 5 ~ 95% (non-condensing)

Operating Temperature: -40~70°C

Storage Temperature: -40~85°C

Safety Cert. Temperature: -20~50°C (-4~122° F)

Operating Humidity: 20 ~ 95% (non-condensing)

Shock Protection: IEC 60068-2-27
CompactFlash 50 G half sine, 11 ms

HDD: 10 G half sine, 11 ms

Vibration Protection: IEC 60068-2-64 (Random 1 Oct./min, 1hr/axis.)
CompactFlash® 2 Grms @ 5 ~ 500 Hz

HDD: 1 Grms @ 5 ~ 500 Hz
1.3 Safety Precautions
The following messages informs how to make each connection. In most cases, you
will simply need to connect a standard cable.
Warning!
Always disconnect the power cord from your chassis whenever you are
working on it. Do not connect while the power is on. A sudden rush of
power can damage sensitive electronic components. Only experienced
electronics personnel should open the chassis.
Caution!
Always ground yourself to remove any static electric charge before
touching UNO-4673A/4683 series. Modernelectronic devices are very
sensitive to static electric charges.Use a grounding wrist strap at all
times. Place all electronic components on a static-dissipative surface or
in a static-shielded bag.
Note! If DC voltage is supplied by an external circuit, please put a protection
device in the power supply input port.