Power supply units, pin assignment
Page 68 of 122
DLT-V83 Series Manual V1.50
Advantech-DLoG
9.2.3.
Measurement results of the power consumption according to ErP
Test results
Idle Mode
24.22 W
Sleep Mode
0.91 W
Soft-Off-Mode (S5)
0.91 W
Lowest Power State
0.00 W (with special connection cable)
Total Energy Consumption (ETEC)
90.07
Test conditions
Required
Actual
Input voltage
230 (±1 %) V a.c.
229.82 – 230.05 V
THD
< 2 %
< 2 %
Frequency
50 Hz (±1 %) 5
0 Hz
Ambient temperature
(23 ±5) °C
23.3ºC
Ambient humidity
10 to 80 %
31 %RH
Ambient light
(250 ±50) Lux
/ (no automatic display luminance
control
Power analyzer used
N4L type PPA1530
(SIQ ID 503; Calibration valid till 2015-07-01)
9.2.4.
Special connection cable for AC device
To facilitate achieving the lower power state:
Set the switch of the Advantech-DLoG power supply cable to
Off
.
