Advantech CompactPCI MIC-3031/14, User Manual, Page: 21 / 25

1 4 MIC-3031/14 User's Manual
2.3.4 Installing a 5.25" Device
Follow the procedures below to install a 5.25"/3.5" device:
1. Fasten one pair of mounting brackets to both sides of a 5.25" device
(or a 3.5" device with extension brackets). Note that the guide
edges of the mounting brackets should be on the lower side.
2. Open the front and rear cover plate of the device tray.
3. Insert the device with attached mounting brackets into the device
tray.
4. Fasten the mounting brackets to the device bay.
5. Connect the cables to the installed device and to the CompactPCI
rear transition board.
6. Close the front and rear cover.
Figure 2-4: Attaching the mounting brackets to a 5.25" device