UNO-2170 User Manual
14
2.9 VGA Display Connector
The UNO-2170 provides a VGA controller (Intel 852 GME, supports a
single 1.5V accelerated graphics port interface) for a high resolution
VGA interface. CRT Mode: 1280 x 1024 @ 32bpp (60Hz), 1024 x 768 @
32bpp (85Hz); LCD/Simultaneous Modes: 1280 x 1024 @ 16bpp(60Hz),
1024 x 768 @16bpp(60Hz) and up to 32 MB shared memory.
2.10 Battery Backup SRAM
UNO-2170 provides 512 KB of battery backed SRAM. This ensures that
you have a safe place to store critical data. You can now write software
applications without being concerned that system crashes will erase criti-
cal data from the memory.
There is a BTRY LED in the front panel of the UNO-2170, please replace
the lithium battery with a new one if the BTRY LED is activated.
2.10.1 Lithium Battery Specification
•
Type:
BR2032 (Using CR2032 is NOT recommended)
•
Output voltage:
3 V
DC
•
Location:
the frontside of UNO-2170 board. (BH2)
Figure 2.5: SRAM Lithium Battery
2.11 Reset Button
Press the "Reset" button to activate the reset function. (SW1)
Summary of Contents for Celeron M Universal Network Controller with PC/104 Extension UNO-2170
