manualshive.com logo in svg

Advantech BB-USR604, User Manual

Share
Download
Advantech BB-USR604 User Manual Download Page 5

 

 

BB-USR604

 

5 

SECTION  1 

OVERVIEW 

1

 

IN THIS SECTION 

Safety................................................................................

   

Product Feature Summary ..................................................

   

About This Manual .............................................................

   

 

The BB-USR604 is an industrial grade, four port, isolated USB to serial converter. It enables any host USB port to 
provide multiple RS-232, RS-422 or RS-485 two or four-wire serial interfaces. 

The BB-USR604 converter supports USB 2.0 high-speed data rates of 480 Mbps. The upstream and downstream 
sections are isolated to 2000 Volts. Industrial features such as a rugged metal case, versatile mounting options, 
high ESD protection, wide temperature ranges, and high retention USB connectors set this device apart from other 
USB to serial converters. 

 

Figure 1: USR602 USB to Serial Converter 

 

SAFETY 

All safety related regulations, local codes and instructions that appear in the literature or on equipment must be 
observed to ensure personal safety and to prevent damage to either the instrument or equipment connected to it. 
If equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment 
may be impaired. 

Summary of Contents for BB-USR604





































Reviews:

No comments

Brands by name

Popular brands

Load more brands