Product Overview
Attach Antennas
Configure Your Device
1
6
Connect the antennas to the connectors on the sides of the
device.
LAN
Port
FRONT VIEW
Serial Ports
BACK VIEW
Detachable
Terminal
Block
Power
Port
LEDs
Antenna
Port
Antenna
Connect Ethernet
2
Connect a Category5 Ethernet cable between the device
and an Ethernet port on a host computer.
Connect Power Supply
3
Connect the 5-36 VDC terminal block attachment or use the
AC power supply (optional).
Connect To The Device
4
Run the Airborne
™
Management Center (AMC) application.
If you do not currently have AMC installed, you can install
it from the included CD or download and install it from the
Advantech website: search for the model number, click
on the
Documents & Downloads
link, then click on the
Software Utility
section to locate and download software.
When AMC starts, it will request a login:
Note: You may be required to wait up to 180 seconds
before the device is discovered and displayed.
Select Group Name: ‘manuf’ and enter Group Password:
“dpac”.
AMC will load and discover the attached device:
AMC will ask if you want to manage the new device, select ‘Yes’:
Select ‘Yes’ to indicate that the device is using Factory
Default settings:
Manage Your Device
5
AMC will display the found Airborne device(s):
Right click the device’s name. Under “Connectivity Tools”
choose “launch Web browser for OEM-Cfg1.” This will
open the device’s browser-based management window.
Login to web interface:
Username “dpac”
Password: “dpac”
Continue configuration via the web interface, start with the
Configuration -> Express Setup page.
(continued)
