ENERGY MONITORING BUNDLE
13
ATTACHING THE SENSORS ON THE INTELLIGENT EDGE NODES
1. Wire Your Sensors.
You can connect up to three sensors to a Wzzard™ node.
Sensor
Wzzard Industrial Node with M12 cable
Wire Color
Sensor 1
Sensor (+) to M12 cable
BROWN
Sensor (-) to M12 cable
GREEN
Sensor 2
Sensor (+) to M12 cable
YELLOW
Sensor (-) to M12 cable
GRAY
Sensor 3
Sensor (+) to M12 cable
PINK
Sensor (-) to M12 cable
BLUE
•
Open the wire protector clamp by pushing it away from the sensor body.
•
Attach your wires.
•
Close the wire protector clamp.
2. Mount Your Sensors.
The sensor can be mounted in any position.
Open the clamp release by pushing it away from the sensor body. Run the wire you are
monitoring through the opening in the sensor.
Close the sensor firmly around your wire and ensure that the clamp release has snapped back
into place.
