3. CONFIGURATION
3.18
SMTP Configuration
You use the
SMTP
form to configure the Simple Mail Transfer Protocol client (SMTP) for
sending e-mails.
Item
Description
SMTP Server Address
IP or domain address of the mail server.
SMTP Port
Port the SMTP server is listening on.
Secure Method
none, SSL/TLS, or STARTTLS. Secure method has to be sup-
ported by the SMTP server.
Username
Name for the e-mail account.
Password
Password for the e-mail account. The password can contain the
following special characters * + , - . / : = ? ! # % [ ] _ { } ~
The following special characters are not allowed: “ $ & ’ ( ) ; < >
Own E-mail Address
Address of the sender.
Table 55: SMTP client configuration
The mobile service provider can block other SMTP servers, then you can only use the SMTP
server of the service provider.
Figure 49: SMTP Client Configuration Example
You send e-mails from the Startup script. The
Startup Script
dialog is located in the
Con-
figuration
section of the main menu. The router also allows you to send e-mails using an SSH
connection. Use the email command with the following parameters:
-t
e-mail address of the receiver
-s
subject, enter the subject in quotation marks
-m
message, enter the subject in quotation marks
-a
attachment file
-r
number of attempts to send e-mail (default setting: 2)
85
Summary of Contents for B+B SmartWorx LR77 v2
