AWSA-K50-CHE
Page
17
TABLE 3
: MECHANICAL SPECIFICATIONS
Physical Dimensions
See
Figure 1:
Product Outline at page 11
Approximate Weight
30 lbs (14 kg)
Mounting holes (6)
0.40” (10 mm) dia. See
Figure 1:
Product Outline at page 11
5.3.2
E
LECTRICAL
C
ONNECTIONS
For the locations of the connectors see
Figure 1
at page 11
&
Figure 3
at page 14. Electrical
interconnections to the system consist of prime power (J5) and external connections for discrete
interface (J3). Use the provided mating connectors included in the packing kit.
•
Prime power
is applied to (J5) connector located on the front panel of the SSPA via the
connector provided.
•
Verify that AC power source is turned OFF.
•
Connect the AC line connector to the AC source (90-132 or 180-265 VAC, 47-63 Hz). Refer
to
Figure 3
at page 14 and
TABLE 2
at page 15 &
TABLE 4
at page 17 for pins
assignments and for input voltage level.
•
Discrete interface
connections are made via (J3) connector. Use the connector provided for
complete monitoring and control of the power amplifier.
TABLE 4
: POWER REQUIREMENTS
Power Requirements
90-132 or 180-265 VAC (auto-ranging),
47-63 Hz, single phase
Power Consumption
700 W, typical
WARNING:
Proper grounding of the AC power outlet is necessary for personnel and
equipment safety.