manualshive.com logo in svg

Advantech AWS-8248V Series, User Manual

Share
Download
Advantech AWS-8248V Series User Manual Download Page 4

AWS-8248V User’s Manual

iv

Packing List                                                                             

Before you set up the AWS-8248V, make sure that the following items 
have been included in your package, and that this manual is in good con-
dition. If anything is missing or damaged, contact your dealer immedi-
ately:

•

One AWS-8248V industrial workstation with 15" flat panel display

•

One accessory box, including:
     - One power cord
     - One keyboard transfer cable
     - One CD-R for IC & HMI products Driver/manual 
     - Flat gray cable for 3.5" HDD and slim CD-ROM
     - RS-232 cable to link touchscreen to CPU card (for -T models only)
     - Screw bag with screws-
 If any of these items is missing or damaged, contact your distributor or sales 

representative immediately.

Additional Information and Assistance                            

1.Visit the Advantech web site at 

www.advantech.com

 where you can 

find the latest information about the product.
2.Contact your distributor, sales representative, or Advantech's customer 
service center for technical support if you need 
additional assistance. Please have the following information ready before 
you call:
•Product name and serial number
•Description of your peripheral attachments
•Description of your software (operating system, version, application 
software, etc.)
•A complete description of the problem
•The exact wording of any error messages

Summary of Contents for AWS-8248V Series













































Reviews:

No comments

Brands by name

Popular brands

Load more brands