Advantech AWMT, Installation And Operation Manual

Page: 22 / 65

AWMT
21
TABLE 2 : CONNECTORS
Connector Function Description Mating Connector
(J1) Tx In IF Input N - Type (F) N - Type (M)
N – Type (F) Low Power Output N – type (M)
WR 75 (Flat) Ku-Band
High Power Output
WR 75 (grooved)
(J7) RF Out RF Output
CPR 137 (Grooved) C-Band
High Power Output
CPR 137
(Flat or grooved)
(J4) Mon RF Output Monitor N - Type (F) N - Type (M)
(J10) LNX
L-Band Input
(from LNB)
N - Type (F) N - Type (M)
(J11)Rx Out IF Output N - Type (F) N - Type (M)
(J2) RS-232 Serial Interface MS3112E10-6P (M) MS3116F10-6S (F)
(J12) RS 485 Serial Interface MS3112E10-6P (M) MS3116F10-6S (F)
(J3) Relay Discrete Interface MS3112E12-10P (M) MS3116F12-10S (F)
(J6) Red Redundancy Interface MS3112E16-26P (M) MS3116F16-26S (F)
AC Line MS3102R16-10P (M) MS3106F16-10S (F)
(J5) Line
48 V DC MS3102R10SL-3P (M) MS3106F20-19SX (F)
(J9) 10 MHz
10 MHz External
Reference (optional)
N - Type (F) N - Type (M)
(J13) +12V
LNX
or L OUT
+12V TO LNX
or L-Band OUT
(optional)
MS3112E8-3S (F)
or N - Type (F)
MS3116F8-3P (M)
or N - Type (M)
Figure 4 : Typical Connector Layout (C-Band)