ATM-4023 User Manual
10
Figure 2.4: Rear View
2.1.4 I/O Interface
•
Power On/Off Switch:
Use this switch to turn on/off the system power.
•
System Reset:
Press this switch to reinitialize the system. This switch
functions like a hardware reset button.
•
Power LED Indicator:
This light is on while the power is turned on.
•
HDD LED Indicator:
This light is on when the HDD is accessing data.
•
USB ports:
Use this port to connect any USB interface device to the
system.
•
KB/MS IN:
Integrated PS/2 type 6-pin keyboard and mouse port.
•
OSD Controls:
LCD backlight On/Off, Menu, Select, Right, Left, Up,
Down.
2.1.5 Drive Bay Installation
The Standard Drive Bay of the ATM-4023 can hold one 3.5" device.
To install a disk drive:
a. Remove the top cover
b. Loosen the four screws of HDD bracket and take off the bracket
c. Insert the HDD in the bracket and secure it with the screws provided.
d. Insert the HDD into its proper location and secure the holding bracket
with the screws.
e. Connect the disk drive power and signal cables to the HDD
Summary of Contents for ATM-4023
