Advantech ASMB-815 Series, User Manual

Page: 22 / 118

ASMB-815 User Manual 14
2.1 Introduction
You can access most of the connectors from the top of the board as it is being
installed in the chassis. If you have a number of cards installed, you may need to par
-
tially remove a card to make all the connections.
2.2 USB Ports (USB1_2, USB3_12, USB3_34,
USB3_56, USB9_10, USB11, USB13_14)
The four USB 3.0 ports on the rear plate and two USB3.0 on-board ports could reach
transmission rates up to 5 Gbps, besides the two USB2.0 ports on the rear and four
on-board ports and one Type-A ports are with 480 Mbps speed. Fuse protection is
supported and the USB interface can be disabled in the system BIOS setup.
2.3 LAN Ports (LAN1~LAN5)
The ASMB-815 is equipped with two 10GbE (LAN3 and LAN4), two GbE LAN
(LAN1,2) ports and one dedicated IPMI LAN (LAN5) port. One of 10 GbE LAN
(LAN3) can be used as IPMI LAN as well for system management. They are all with
RJ-45 jacks and supported by all major network operating systems.
USB1_2
USB3_12
USB3_34
USB13_14
USB3_56
USB9_10
USB11
USB1_2 USB3_12
USB3_34 USB9_10 USB3_56
USB13_14
LAN1
LAN2
LAN5 LAN3_4
LAN1 LAN2 LAN3 IPMI LAN (LAN5)
LAN4