Advantech ASMB-782G2-00A1E, User Manual

Page: 17 / 98

7 ASMB-782 User Manual
Chapter 1
H
ardware
C
onfiguration
1.6 ASMB-782 Block Diagram
Figure 1.3 ASMB-782 Block Diagram
1.7 Safety Precautions
Intel LGA 1155
Intel® Xeon® E3 /
E3 v2 / 2nd and
3rd Core™ i3 /
Pentium processors
Channel A
2 SATA III Ports
10 USB 2.0
Audio Codec
ALC892
64 Mbit
BIOS
Flash
Nuvoton
NCT6776
G-LAN1 :
Intel 82579LM (PHY)
FDI
Intel C216 PCH
G-LAN2 :
Intel 82574L
DMI
2 RS 232
1 LPT
(ECC) DDR3 1066/1333/1600
(ECC) DDR3 1066/1333/1600
Channel B
(ECC) DDR3 1066/1333/1600
(ECC) DDR3 1066/1333/1600
4 SATA II Ports
RAID 0, 1, 5, 10
4 USB 3.0
3 PCI slots
Gen 3.0
PCIe x8
Gen 3.0 One PCIe x16 slot (x8 link)
One PCIe x 4 slot
G-LAN3 :
Intel 82574L
G-LAN4 :
Intel 82574L
One PCIe x 4 slot
Level Shifter
VGA D-Sub
DVI Pin header
SPI Bus
LPC Bus
LPC
Connector
Gen 3.0
PCIe x 1
Gen 2.0
PCIe x 1
Gen 2.0
PCIe x 1
Gen 2.0
PCIe x 1
Gen 2.0
USB 3.0
33MHz PCI
600MB/s
USB 2.0
HD Audio
300MB/s
DP
Gen 2.0
One PCIe x16 slot (x8 link)
Warning! Always completely disconnect the power cord from your chassis when-
ever you work with the hardware. Do not make connections while the
power is on. Sensitive electronic components can be damaged by sud-
den power surges. Only experienced electronics personnel should open
the PC chassis.
Caution! Always ground yourself to remove any static charge before touching the
motherboard. Modern electronic devices are very sensitive to static
electric discharges. As a safety precaution, use a grounding wrist strap
at all times. Place all electronic components on a static-dissipative sur-
face or in a static-shielded bag when they are not in the chassis.
Caution! The computer is provided with a battery-powered real-time clock circuit.
There is a danger of explosion if battery is incorrectly replaced. Replace
only with same or equivalent type recommended by the manufacturer.
Discard used batteries according to manufacturer’s instructions.
Caution! There is a danger of a new battery exploding if it is incorrectly installed.
Do not attempt to recharge, force open, or heat the battery. Replace the
battery only with the same or equivalent type recommended by the man-
ufacturer. Discard used batteries according to the manufacturer’s
instructions.