ASMB-782 Startup Manual 3
JWDT1: Watchdog timer output option
Closed Pins
Result
1-2
System reset*
2-3
NC
*: Default
PSON1: ATX, AT mode selector
Closed Pins
Result
1-2
AT Mode
2-3
ATX Mode*
*: Default
Installation Note
JFP1
Pin.1
#PWR_SW
Pin.3
GND
Pin.2
#RST_SW
Pin.4
GND
*Power button pin is located in Pin 1 & 3 of front panel
connector
System Reset 1-2 Closed NC 2-3 Closed
1
2
3
1
2
3
AT Mode 1-2 closed ATX Mode 2-3 closed
1
2
3
1
2
3
The CD disc contains a driver installer program that will
lead you through the installation of various device drivers
needed to take full advantage of your motherboard.
The computer is supplied with a battery-powered realtime
clock circuit. There is a danger of explosion if battery is
incorrectly replaced. Replace only with same or equivalent
type recommended by the manufacturer. Discard used bat-
teries according to manufacturer’s instructions.
This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired opera-
tion
Jumpers and Connectors
Software Installation
Declaration of Conformity
