manualshive.com logo in svg

Advantech ASMB-781, User Manual

Share
Download
Advantech ASMB-781 User Manual Download Page 25

15

ASMB-781 User Manual

Chapter 2

C

onnecting

Peripherals

2.3

USB Ports (LAN2_USB34, USB56, USB78, 
USB910, USB1112)

These ports support Plug & Play and hot swapping for up to 127 external devices.
The USB ports comply with USB specification rev. 2.0. Transmission rates of up to
480 Mbps and fuse protection are supported. The USB interface can be disabled in
the system BIOS setup.

The ASMB-781 is equipped with two or four high-performance 1000 Mbps Ethernet
LANs. They are supported by all major network operating systems. The RJ-45 jacks
on the rear plate provide convenient 1000 Mbps operation.

If all USB ports will be used, USB power is recommended to switch to +5V instead of
+5VSB.

LAN 1/2 LED Indicator

 

LAN 3/4 LED Indicator

 

LAN Mode

LAN Indicator

1 Gbps Link on

LED1 Green on (left)

100 Mbps Link on

LED1 Orange on (left)

10 Mbps Link on

LED1 N/A (left)

Active

LED2 Green flash (right)

LAN Mode

LAN Indicator

1 Gbps Link on

LED1 Green on (Right)

100 Mbps Link on

LED1 Orange on (Right)

10 Mbps Link on

LED1 N/A (Right)

Active

LED2 Green flash (left)

USB56

USB78

USB910

USB1112

USB 11

LAN1_USB12

LAN2_USB34

USB 12

USB 910

USB78

USB 56

           

Summary of Contents for ASMB-781





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands