Advantech ASMB-610, User Manual, Page: 84 / 126

ASMB-610 User Manual 76
3.4.3 PCH-IO Configuration
Figure 3.23 PCH-IO configuration screen

LAN1 Controller
Enable or disable onboard NIC.

Port 1~4 Option-ROM
Enable or disable Boot Options for LAN1 controller.

PCIe Wake
Enable or disable PCIE to wake the system from S5.

Restore AC Power Loss
Select what state to go to when power is re-applied after a power failure (G3
state).
Note! When a system enters G3 status with deep S5 enabled, some power
supply's 5VSB won't drop until after more than 30 seconds. If “Restore
AC Power Loss” is set to “power on”, the system won't boot up for 30
seconds after power failure. We recommend the user waits for more
than 30 seconds to power on after a power failure. On the other hand,
the system will auto power on if power is restored within 30 seconds,
before 5VSB actually drops, even if “Restore AC Power Loss” is set to
“power off”.