2 ASMB-588 Startup Manual
Connector list
PCIEX16_SLOT6
PCIe x16 slot (Gen5 x16 link)
PMBUS1
PMBUS connector to communicate
with power supply
SATA0~4
SATA III (6 Gb/s)
SMBUS1
SMBus connector
SPDIF_OUT1
SPDIF audio output pin header
SPI_CN1
SPI flash card pin header
SPI_TPM1
SPI connector to support Advantech
TPM 2.0 module (P/N: PCA-TPMSPI-
00A1)
SYSFAN0,SYSFAN1,
SYSFAN2,SYSFAN3
System FAN connector
SYS_LED1
System information LED connector
USB2A1
USB 2.0 port (USB Type A)
USB2H1, USB2H2
USB 2.0 port (header)
USB3H1
USB 3.2 Gen1 port (header)
Jumper list
Label
Function
JCMOS1
CMOS clear
JFV1
VGA is forced on
JME1
Intel ME disable jumper for ME/
BIOS update
JPEG1
x16 or x8x8 for slot-6
JPSMB1, JPSMB2
PCIE SLOT SMBUS connector: to
PCH (1-2)/ to BMC (2-3)
JSMB1
For RD debugging
JTHR_SEL1
Selects on board or external
thermistor
JUSB_1
Rear window USB 3.2 Gen2 port
power source switch b5
V
SB
and +5 V
JUSB_2
On board USB 2.0/3.2 Gen1 port
power source switch b5
V
SB
and +5 V
JWDT1
Watchdog reset
PSON1
AT(1-2)/ATX(2-3)
The board has a number of jumpers that allow you to con-
figure your system to suit your application. The table below
lists the function of each jumper and connector.
Connector list
Label
Function
ATXPWR1
ATX 24-pin main power connector
(for System)
ATX12V1
8-pin power connector (for CPU)
AUDIO2
Audio connector
BAT1
For RTC battery
BAT2
For optional battery kits
BIOS_SKT1
BIOS SPI ROM
BMC2
BMC connector to support Advantech
IPMI module (P/N: IPMI-2000-00A1)
COM1, COM2_3
Serial port: RS-232
CPUFAN0
CPU FAN connector
DIMMA0, DIMMA1,
DIMMB0, DIMMB1
DDR5 288-pin slot
DVI1
DVI connector
ESPI1
For RD debugging
EX_THR1
For external thermistor cable kit
FPAUD1
Front panel audio header
GPIO1
8-bit GPIO header
HDMI1_VGA1
HDMI + VGA connector
JCASE1
Case open
JFP1
To support 1U chassis (cable P/N:
1700031926-11)
Power Switch/Power Reset/Power
LED/LAN1LED/LAN2LED/HDD LED
Power LED Behavior:
• Suspend: Fast flash (ATX/AT)
•
System On: ON (ATX/AT)
• System Off: OFF (ATX/AT)
JFP1+JFP2
Power Switch/ Power Reset/ External
Speaker/ HDD LED/ SMBus con-
nector
JFP3
Keyboard lock and power LED
• Suspend: Fast flash (ATX/AT)
•
System On: ON (ATX/AT)
• System Off: OFF (ATX/AT)
LAN1_USB3C1,
LAN2_USB3C2
LAN1/USB 3.2 Gen2 port 1, 2 stack
connector
LAN2/USB 3.2 Gen2 port 3, 4 stack
connector
LAN3_LAN4
LAN3 & LAN4 connector
LANLED1
LAN LED extension connector
M2_2280_1
M.2 2280 (PCIe)
PCIEX4_SLOT4,
PCIEX4_SLOT7
PCIe x4 slot (Gen4 x4 link)
Jumpers and Connectors
Jumpers and Connectors (Cont.)
