Advantech ASMB-260I-21A1, User Manual

Page: 10 / 74

ASMB-260 User Manual 4
1.4 Board Layout, Jumpers and Connectors
Connectors on the ASMB-260 are linked to external devices such as hard disk
drives. In addition, ASMB-260 has a number of jumpers that are used to configure
the system for specific applications.
The tables below list the functions of each jumper and connector. Later sections in
this chapter give instructions for setting jumpers. Chapter 2 gives instructions for con-
necting external devices to ASMB-260.
Figure 1.1 Board Layout
PC Health
Monitoring
Voltage Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT
FAN
 One 4-pin header for CPU cooler and four 4-pin headers for sys-
tem fans
 All fans with tachometer status monitoring
 Thermal control for all fan connectors
Temperature
 Monitoring for CPU (PECI)
 Monitoring for system (BMC) through external thermal sensor
cable.
Other Features
(Case Open) 
Chassis intrusion detection
 Chassis intrusion header
Operating Environment / Compliance
RoHS RoHS 6/6 Pb free compliant
Environmental Spec.
 Operating temperature: 0 to 60° C
 Non-operating temperature: -40 to 85° C
 Operating relative humidity: 10% to 90% (non-condensing)
 Non-operating relative humidity: 10% to 95% (non-condensing)
Table 1.1: Specifications
PCIEX4_
Slot_1
VGA1_COM1
LAN1_
USB1_2
LAN2_3
DIMM B1
DIMM A2
DIMM B2
DIMM A1
ATX PWR1
ATX PWR2
JFP1+ JFP2
SATA0
SATA5
GPIO1
SATA7
EX_THR1
SYSFAN2
USB3_4
SATA6
SATA_PWR1
SATA_PWR2
SATA2
SATA3
SYSFAN1
SYSFAN0
COM2
SATA4
CPUFAN0
PMBUS1
JP_USB2
JME1
JCASE1
BMC_CN1
BMC_CN2
SYSFAN3
SATA1
JP_CMOS
JFP3
BIOS1
PSON1
SATA8
JP_USB1