Advantech ARK-6320, User Manual

Page: 24 / 96

ARK-6320 User Manual 12
3.3 Motherboard Diagram
Figure 3.2 Motherboard Diagram
3.4 Jumper Settings
This section provides instructions on how to configure the motherboard by setting the
jumpers. It also includes the motherboard’s default settings and your options for each
jumper.
3.4.1 How to Set Jumpers
You can configure motherboard to match the needs of your application by setting the
jumpers. A jumper is a metal bridge that closes an electrical circuit. It consists of two
metal pins and a small metal clip (often protected by a plastic cover) that slides over
the pins to connect them. To “close” (or turn ON) a jumper, you connect the pins with
the clip. To “open” (or turn OFF) a jumper, you remove the clip. Sometimes a jumper
consists of a set of three pins, labeled 1, 2, and 3. In this case you connect either pins
1 and 2, or 2 and 3. A pair of needle-nose pliers may be useful when setting jumpers.
ICH8M
Fintek
F81216D
3 RS-232
LPC
Super IO Winbond
W83627DHG
Intel D510 DDR2 667/800
Channel A
Dir
e
ct
Media
Int
e
rf
ac
e 20-Gbit/s
bandwidth
CRT
VGA
1 ATA 100 Port or
CF Type II
2 SATA ports
8 USB Ports
Realtek ALC888
300 MB/s
DMA 33/66/100
USB 2.0/1.1
HD Audio
GbE LAN1:
Intel 82567V
GbE LAN2:
Intel 82583V
PCI
LCI & GLCI
PCIe x1
32-bit/33MHz PCI Bus
PCIe x1
Mini-PCIe