manualshive.com logo in svg

Advantech ARK-3440 Series, User Manual

Share
Download
Advantech ARK-3440 Series User Manual Download Page 38

ARK-3440 User Manual

28

–

Hyper-threading: Enabled for Windows XP and Linux (OS optimized for 

Hyper-Threading Technology) and Disabled for other OS (OS not optimized 
for Hyper-Threading Technology). When Disabled only one thread per 
enabled core is enabled.

Disabled

Enabled [Default]

–

Active Processor Cores: Number of cores to enable in each processor pack-

age.

All [Default]

1

2

–

Limit CPUID Maximum: Disabled for Windows XP.

Disabled [Default]

Enabled

–

Hardware Prefetcher: To turn on/off the MLC streamer prefetcher.

Disabled

Enabled [Default]

–

Adjacent Cache Line Prefetch: To turn on/off prefetching of adjacent cache 

lines.

Disabled

Enabled [Default]

–

Intel Virtualization Technology: When enabled, a VMM can utilize the addi-

onal hardware capabilities provided by Vander pool Technology.

Disabled [Default]

Enabled

–

Power Technology: Enable the power management features.

Summary of Contents for ARK-3440 Series



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands