Advantech ARK-3383, User Manual

Page: 28 / 90

ARK-3383 User Manual 16
2.4.2 USB Connectors (USB0 ~ USB6)
The Rear Metal faceplate of ARK-3383 provides seven USB 2.0 interface
connectors: USB 0, USB 1, USB 2, USB 3, USB 4, USB 5 and USB 6;
each USB port provides complete Plug & Play and hot swapping for
external devices. The USB interface complies with USB UHCI, Rev. 2.0
spec.
The USB connectors are used for connecting any device that conforms to
the USB interface. Many recent digital devices conform to this standard.
The USB interface supports Plug and Play, which enables you to connect
or disconnect a device whenever you want, without turning off the com-
puter.
Figure 2.9: USB connector
2.4.3 VGA Connector
The ARK-3383 provides a high resolution VGA interface by a D-sub 15-
pin connector to support a VGA CRT monitor. It supports VGA and
VESA, up to 1600 x 1200 @85-Hz resolution and up to 32 MB of shared
memory.
Figure 2.10: VGA connector
Table 2.10: USB Connector
Pin Signal name
1 VCC
2 USB_P0-
3
4 GND
1 5
9 6
3 2 4
7 8