15
ARK-2232 User Manual
Chapter 2
H
/W Installation
2.3.1.6
USB 2.0 Connector
ARK-2232 provides four USB 2.0 interface connectors. The USB 3, 4, 5, 6 connec-
tors are used to connect any device that conforms to the USB interface. Most digital
devices conform to this standard. The USB interface supports Plug and Play.
Figure 2.9 USB 2.0 Connector
2.3.1.7
Ethernet Connector (LAN)
ARK-2232 is equipped with two Ethernet controllers that are fully compliant with IEEE
802.3u 10/100/1000 Mbps CSMA/CD standards. LAN1, LAN2 are all equipped with
Intel i210-IT Ethernet controller. The Ethernet port provides a standard RJ-45 jack
connector with LED indicators on the front side to show its Active/Link status (Green
LED) and Speed status (Yellow LED).
Figure 2.10 Ethernet Connector (LAN)
Pin
Signal Name
Pin
Signal Name
1
VCC
2
USB_data-
3
U
4
GND
Pin
Signal Name
1
TX+
2
TX-
3
RX+
4
MDI2+
5
MDI2-
6
RX-
7
MDI3+
8
MDI3-
Summary of Contents for ARK-2232
