Advantech ARK-1388V, User Manual, Page: 27 / 109

17 ARK-1388V User Manual
Chapter 2
H
/W installation
2.2.2.3 LVDS Connector
The ARK-1388V comes with a D-Sub 26-pin connector that carries LVDS signal out-
put, and can direct connect to LVDS LCD Display via external cable.
The system also provide a jumper of J1 on internal motherboard for selecting the
LCD signal power of 5V or 3.3V, please refer to section2.1.3 for the jumper table of
J1, and Chapter 6 of "Full Disassembly Procedure to set it. Up. The default setting of
J1 is 5V.
Figure 2.7 LVDS Connector
8 GND
9 NC
10 GND
11 NC
12 NC
13 H-SYNC
14 V-SYNC
15 NC
Table 2.12: VGA connector pin assignments
Table 2.13: LVDS Connector Pin Assignments
Pin Signal Name Pin Signal name
1 CLK2P 14 CLK2M
2 GND 15 A0M
3 A0P 16 A1M
4 A1P 17 A2M
5 A2P 18 CLK1M
6 CLK1P 19 GND
7 VCC_LCD 20 VDD_LCD
8 GND 21 A3M
9 A3P 22 A4M
10 A4P 23 A5M
11 A5P 24 A6M
12 A6P 25 A7M
13 A7P 26 GND