AMAX-5580 User Manual
20
And also install the related driver in the operating system to enable the functionality.
Change the Battery
The battery keeps the BIOS setting and CMOS. Please change the battery while
the “BATT LOW” LED is on. The specification is as below
Install the USB device in the internal USB2.0 port
AMAX-5580 reserves one port inside the chassis for important USB devices.
The USB device could be:
–
USB dongle key for software
–
Extra USB storage for data
Jumper/DIP switch settings for special functions
Below is the SW5 function
Jumper ERR_LOGIC1
This jumper is to set the relay for power alarm output
Type
Lithium Carbon-Monoflouride
Size
BR2032
Operation Temperature -40 °C to +85 °C
Advantech Part Number 1750199011
DIP
Function
Status
1
Power for USB1&2
in standby mode
ON: USB supply 5V
OFF: None (default)
2
Power for USB3&4
in standby mode
ON: USB supply 5V
OFF: None (default)
3
VGA force output
ON: No output load
OFF: Simulate output load (default)
4
Power AT mode
ON: Hardware AT mode
OFF: Simulated AT mode (default)
Position of Jumper
Status
PIN 1-2 short
Normal Open
PIN 2-3 short
Normal Close
Summary of Contents for AMAX-5580
