Advantech AIMB-U233, User Manual

Page: 20 / 86

AIMB-U233 User Manual 10
2.1 Introduction
Most of the device connectors can be accessed from the top of the board during
installation in the chassis. If the system is installed with several cards or the chassis
is packed, partial removal of the card may be necessary to make all connections.
Please refer to the Appendix if you need more detailed information regarding the con -
nectors and pin definitions.
2.2 LAN and USB Ports (LAN12, USB12/USB34)
AIMB-U233 provides 2 USB3.2 Gen2 x1 which are located on the rear side. The USB
interface complies with the USB specification revision 3.2 that supports transmission
rates of up to 10 Gbps and 2 x USB2.0 internal pin header that supports 480 Mbps.
The AIMB-U233 system is equipped with 2 high-performance 1000 Mbps Ethernet
LAN adapters. All of them are supported by all major network operating systems. The
RJ-45 jacks on the rear panel facilitate a convenient LAN connection.
Table 2.1: LAN LED Indicators
LAN Mode LAN Indicator
1 Gbps link on LED1 Green on
100 Mbps link on LED1 Orange on
Active LED2 Green flashing