Advantech AIMB-784, User Manual, Page: 52 / 114

AIMB-784 User Manual 42
 WatchDog
“Enable or Disable” Watchdog Timer
3.2.2.9 USB Configuration
Figure 3.13 USB Configuration

Legacy USB Support
This is for supporting USB device under legacy OS such as DOS. When choos-
ing "AUTO", the system will automatically detect if any USB device is plugged
into the computer and enable USB legacy mode when a USB device is plugged
and disable USB legacy mode when no USB device is plugged.
 USB3.0 support
Enable/Disable USB3.0 (XHCI) support
 XHCI Hand-off
This is a workaround for OS without XHCI hand-off support. The XHCI owner-
ship change should be claimed by XHCI driver.
 EHCI Hand-off
This is a workaround for OS without EHCI hand-off support. The EHCI owner-
ship change should be claimed by EHCI driver.
 USB Mass Storage Driver Support
Enable or Disable USB Mass Storage driver support.
 USB transfer time-out
Allows you to select the USB transfer time-out value. [1,5,10,20sec]
 Device reset time-out
Allows you to select the USB device reset time-out value. [10,20,30,40sec]
 Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. "Auto" uses default value: for a Root port it is 100 ms, for a Hub port
the delay is take from Hub descriptor.