1-32
Chapter 1: Product introduction
F_PANEL
System panel connector
*
Requires an ATX power supply.
PWR
Ground
GND
Reset
IDE_LED-
RESET
IDE LED
PWRSW
PWR_LED-
PWRLED
•
Power/Soft-off button (Black 2-pin PWRSW)
This connector is for the system power button. Pressing the power button
turns the system ON or puts the system in SLEEP or SOFT-OFF mode
depending on the BIOS settings. Pressing the power switch for more than
four seconds while the system is ON turns the system OFF.
•
System Power LED connector (2-pin PWRLED)
This 2-pin connector is for the system power LED. The system power LED
lights up when you turn on the system power, and blinks when the system is
in sleep mode.
•
Reset button (Blue 2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system
reboot without turning off the system power.
•
Hard disk drive activity (Red 2-pin IDELED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity
LED cable to this connector. The IDE LED lights up or flashes when data is
read from or written to the HDD.
13. System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
The sytem panel connector is color-coded for easy connection. Refer to the
connector description below for details.
