Advantech AIMB-740 Series User Manual Download Page 2 | Manualshive

Page: 2 / 134

Advantech AIMB-740 Series User Manual Download Page 2

AIMB-740/741 User’s Manual

ii

Copyright Notice

This document is copyrighted, 2003, by Advantech Co., Ltd. All rights
are reserved. Advantech Co., Ltd. reserves the right to make improve-
ments to the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmit-
ted in any form or by any means without the prior written permission of
Advantech Co., Ltd. Information provided in this manual is intended to
be accurate and reliable. However, Advantech Co., Ltd. assumes no
responsibility for its use, nor for any infringements upon the rights of
third parties which may result from its use.
Acknowledgements
•AWARD is a trademark of Phoenix Technologies Ltd.
•IBM and PC are trademarks of International Business Machines Corpo-
ration.
•Intel®, Pentium® 4, and Celeron™ are trademarks of Intel Corporation.
•WinBond is a trademark of Winbond Corporation.
All other product names or trademarks are the properties of their respec-
tive owners.

Part No. 2002074001 2nd. Edition

Printed in Taiwan March 2004

«
1
2
3
4
...
»

Summary of Contents for AIMB-740 Series







































































































































Reviews:

No comments