Advantech AIMB-330F, User Manual

Page: 83 / 124

69 Chapter 6
6.7.2 HDD Power Down
You can choose to turn the HDD off after one of the time intervals listed,
or when the system is in “suspend” mode. If the HDD is in a power sav-
ing mode, any access to it will wake it up.
6.7.3 Suspend Mode
Enabling Suspend Mode feature. The commands are “Enabled” or “Dis-
abled”.
6.7.4 Video Off Option
The default is “Suspend ->off”. When system is suspend, video will turn
off.
6.7.5 Video Off Mode
Select Video Off Mode and press “Enter”, the choice is “Blank Screen”,
“V/H SYNC+Blank” and “DPMC Support”.
6.7.6 Modem Use IRQ
This determines the IRQ in which the MODEM can use.The choices: 3, 4,
5, 7, 9, 10, 11, NA.
6.7.7 Soft-Off by PWR-BTTN
If you choose “Instant-Off”, then pushing the ATX soft power switch but-
ton once will switch the system to “system off” power mode. You can
choose “Delay 4 sec.” If you do, then pushing the button for more than 4
seconds will turn off the system, whereas pushing the button momentarily
(for less than 4 seconds) will switch the system to “suspend” mode.
Max. Power Saving Maximum power management., Suspend Mode = 1 min.,
and HDD Power Down = 1 min.
User Defined
(Default) Allows you to set each mode individually. When not dis-
abled, each of the ranges are from 1 min. to 1 hr. except
for HDD Power Down which ranges from 1 min. to 15 min.
and disable.