Advantech AIMB-288E, User Manual

Page: 79 / 92

71 AIMB-288E User Manual
C
ha
pte
r 3
BIO
S O
pe
ra
tio
n

Setup Prompt Timeout
User the <+> and <-> keys to adjust the number of seconds to wait for the setup
activation key.

Bootup NumLock State [Off]
Set the power to the On or Off state for the NumLock.

Quiet Boot [Disabled]
If this option is set to disabled, the BIOS displays normal POST messages. If
enabled, an OEM logo is shown instead of POST messages.
3.2.6 Save & Exit Configuration

Save Changes and Exit
When users have completed system configuration, select this option to save
changes, exit the BIOS setup menu and reboot the computer for the changes to
take effect on all system configuration parameters.
1. Select Save Changes and Exit from the Save & Exit menu and press
<Enter>. The following message appears: Save Configuration Changes and
Exit Now?
2. Select [Ok] or [Cancel].

Discard Changes and Exit
Select this option to quit setup without making any permanent changes to the
system configuration.
1. Select Discard Changes and Exit from the Save & Exit menu and press
<Enter>. The following message appears: Discard Changes and Exit Setup
now? [Ok] or [Cancel]
2. Select Ok to discard changes and exit.

Save Changes and Reset