3-6
AIMB-253
Mainboard
If you select [Manual], related information is asked to be entered to the following
items. Enter the information directly from the keyboard. This information should be
provided in the documentation from your hard disk vendor or the system manufac-
turer.
Access Mode
The settings are CHS, LBA, Large, Auto.
Capacity
The formatted size of the storage device.
Cylinder
Number of cylinders.
Head
Number of heads.
Precomp
Write precompensation.
Landing Zone
Cylinder location of the landing zone.
Sector
Number of sectors.
Halt On
The setting determines whether the system will stop if an error is detected at boot.
When the system stops for the errors preset, it will halt on for 15 seconds and then
automatically resume its operation. Available options are:
[All Errors]
The system stops when any error is detected.
[No Errors]
The system doesn’t stop for any detected error.
[All, But Keyboard]
The system doesn’t stop for a keyboard error.
Base/Extended/Total Memory
The three items show the memory status of the system. (Read-only)
