Advantech AIMB-225, User Manual

Page: 17 / 102

5 AIMB-225 User Manual
Chapter 1
G
eneral
Information
1.4 Jumpers and Connectors
Connectors on the AIMB-225 motherboard link it to external devices such as hard
disk drives and a keyboard. In addition, the board has a number of jumpers used to
configure your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.
Table 1.1: Connector / Header List
Description Part Reference
1 DC-IN adaptor connector DCIN1
2 Display Port connector DP1
3 eDP panel voltage selection JLVDS4
4 DVI-I connector DVI_D1
5 Serial ATA interface connector SATA2
6 SATADOM power pin header JSATAPWR1
7 Serial ATA interface connector SATA1
8 CMOS battery wafer box BAT1
9 System fan control mode selection JSYSFAN1
10 USB3.0 * 2 stack connector USB12
11 SPI BIOS socket BIOS_1
12 USB2.0 * 2 stack connector USB34
13 COM1 box header COM1
14 Watchdog timer output and OBS beep JWDT1+JOBS1
15 RJ45(LAN1+LAN2) connector LAN1_1
16 SPDIF interface pin header SPDIF_OUT1
17 HD Analog Audio Interface AUDIO1
18 Front panel audio pin header FP_AUDIO1
19 Audio amplifier output pin header AMPJ1
20 PCI-Express x4 slot PCIEX4_1
21 LVDS VESA, JEIDA format selection pin header VCON1
22 LVDS panel connector LVDS1
23 Dual port USB2.0 pin header USB56
24 LVDS panel voltage selection JLVDS2
25 COM5 RI# selection pin header JSETCOM5_V1
26 LVDS Backlight inverter power connector INV1
27 8-bits General Purpose I/O pin header GPIO1
28 COM2 ~ COM5 box header COM2345
29 AT/ATX Mode selection PSON1
30 ATX Power supply(5VSB) connector ATX_5V1
31 COM1 RS232,RS422,RS485 selection pin header JSETCOM1
32 SATA power connector SATA_PWR1
33 CPU fan control mode selection JCPUFAN1
34 System fan connector SYSFAN1
35 Case open selection pin header JCASEOP_SW1
36 Case open pin header JCASE1
37 PS/2 keyboard and PS/2 mouse connector KBMS1