Copyright 2019. All rights reserved. Advantech Co. Ltd.
Page 19
2.6
SSH Connection to Access the Standard Image
Follow next steps to connect to board with booted system via ssh protocol:
1.
Plug in Ethernet cable connected to your local net in one of two RJ45
connectors.
2.
In console run
ifconfig
with no parameters to find out the ip address of board
(Figure 15).
3.
On another computer run next command in console:
$ ssh <remote username>@<ip address>
or if you want to connect from Windows, set up the SSH connection for
PuTTy, then press
Open
button to
connect (Figure 16).
After completing these steps your computer will be connected to board via ssh
protocol.
Summary of Contents for AIMB-217
Page 10: ...Copyright 2019 All rights reserved Advantech Co Ltd Page 10 Figure 2 Top panel of AIMB 217 ...
Page 12: ...Copyright 2019 All rights reserved Advantech Co Ltd Page 12 Figure 4 Bottom panel of AIMB 217 ...
Page 14: ...Copyright 2019 All rights reserved Advantech Co Ltd Page 14 Figure 6 EFI boot menu ...