background image

65

AIMB-215 User Manual

Chapter 3

B

IOS Operation

GOP Driver

This item allows users to enable or disable the GOP driver.

Integrated Graphics Device

This item allows users to enable or disable an integrated graphics device.

IGD Turbo Enable

This item allows users to enable or disable the IGD Turbo Enable function.

Primary Display

This item allows users to select which IGD/PCI graphics device should be used 
as the primary display.

GFX Boost

This item allows users to enable or disable GFX Boost.

PAVC

This item allows users to enable or disable Protected Audio Video Control.

DVMT Pre-Allocated

This item allows users to specify the DVMT 5.0 pre-allocated (fixed) graphics 
memory size to be used by the internal graphics device.

DVMT Total Gfx Mem

This item allows users to specify the DVMT 5.0 total graphics memory size to be 
used by the internal graphics device.

Aperture Size

This item allows users to select the aperture size.

DOP CG

This item allows users to enable or disable DOP CG.

GTT Size

This item allows users to select the GTT size.

IGD Thermal

This item allows users to enable or disable IGD thermal control.

Spread Spectrum clock

This item allows users to enable or disable the spread spectrum clock.

ISP Enable/Disable

This item allows users to enable or disable ISP function.

ISP PCI Device Selection

This item allows users to enable or disable ISP PCI device selection.

VCC and VNN Configuration for Power State 2:

Vcc_Vnn Config for Power State 2

This item allows users to enable or disable VCC and VNN Configuration for 
Power State 2.

Summary of Contents for AIMB-215









































































































































Reviews: