manualshive.com logo in svg

Advantech AIMB-214, User Manual

Share
Download
Advantech AIMB-214 User Manual Download Page 26

AIMB-214 User Manual

14

2.1

Introduction

You can access most of the connectors from the top of the board as it is being
installed in the chassis. If you have a number of cards installed or have a packed
chassis, you may need to partially remove the card to make all the connections.

2.2

USB Ports (LAN1_USB12/LAN2_USB34/USB56)

The AIMB-214 provides up to six USB ports. The USB interface complies with USB
Specification Rev. 2.0 supporting transmission rate up to 480 Mbps and is fuse pro-
tected. The USB interface can be disabled in the system BIOS setup.

The AIMB-214 is equipped with two high-performance 1000 Mbps Ethernet LAN
adapters, both of which are supported by all major network operating systems. The
RJ-45 jacks on the rear panel provide for convenient LAN connection.

                     USB56

Table 2.1: LAN LED Indicator

LAN Mode

Lan Indicator

1 Gbps Link on

LED1 Green on

100 Mbps Link on

LED1 Orange on

Active

LED2 Green flash

LAN2_USB34 LAN1_USB12

LAN1_USB12     LAN2_USB34

Summary of Contents for AIMB-214





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands