Advantech AIMB-203 User Manual Download Page 78

Page: 78 / 122

AIMB-203 User Manual



DMI Extended Synch Control

This item allows users to enable or disable DMI Extended Synch.



DMI Gen 2

This item allows users to select DMI speed.



DMI De-emphasis Control

Configure the De-emphasis control on DMI.



DMI IOT

This item allows users to enable or disable DMI IOT.

3.2.3.6

NB PCIe Configuration



PEG0 - Gen x

"Auto, Enable or Disable" PEG0 - Gen x



Run-time C7 Allowed

Enable or Disable the entry to C7 state. Don't enable this feature until you have
all the appropriate Save/Restore Controller/Endpoint states.



Enable PEG

"Auto, Enable or Disable" Enable PEG.



Detect Non-Compliance Device

Detect Non-Compliance PCI Express Device in PEG.



Program PCIe ASPM after OpROM

Enabled: PCIe ASPM will be programmed after OpROM
Disabled: PCIe ASPM will be programmed before OpROM



PEG0 De-emphasis Control

Configure the De-emphasis control on PEG0.



PEG0 ASPM

Control ASPM support for the PEG Device. This has no effect if PEG is not the
currently active device.

Summary of Contents for AIMB-203



























































































































Search results

Summary of Contents for AIMB-203

Reviews:

Related manuals for AIMB-203

Brands by name

Popular brands

Advantech AIMB-203, User Manual

Search results

Summary of Contents for AIMB-203

Reviews:

Related manuals for AIMB-203

Brands by name

Popular brands