background image

 

 

15.21

   

Any changes or modifications not expressly approved by the party responsible for 
compliance could void the authority to operate equipment.   
This device and its antenna must not be co-located or operating in conjunction with 
any other antenna or transmitter.   
End-users and installers must be provided with antenna installation instructions and 
transmitter operating conditions for satisfying RF exposure compliance.   
For product available in the USA/Canada market, only channel 1~11 can be operated. 
Selection of other channels is not possible. 
 

FCC Radiation Exposure Statement

 

This equipment complies with FCC RF radiation exposure limits set forth for an 
uncontrolled environment for body-worn configuration in direct contact to the 
phantom.   
This device complies with FCC radiation exposure limits set forth for an uncontrolled 
environment. 
 

This equipment complies with FCC radiation exposure limits set forth for an 
uncontrolled environment. End user must follow the specific operating instructions 
for satisfying RF exposure compliance. This transmitter must not be co-located or 
operating in conjunction with any other antenna or transmitter. 

The portable device is designed to meet the requirements for 

exposure to radio waves established by the Federal Communications 

Commission (USA). These requirements set a SAR limit of 1.6 W/kg 

averaged over one gram of tissue. The highest SAR value reported under 
this standard during product certification for use when properly worn on the body 

Summary of Contents for AIM-68 Series
































Reviews: