Advantech ACP-4001, User Manual, Page: 17 / 44

13 Chapter 2
2.2 2 Installation of ACP-4001 Serial Models
The ACP-4001 could be configured as following three basic models, such
as ACP-4001BP-00 bare model, ACP-4001BP-25Z/30Z/30R/31D with
power only, and full integrated as ACP-4001P4-XXC3/C4, ACP-
4001P4XXM3/M4.
2.2.1 ACP-4001BP-00
ACP-4001BP-00 is a bare model, which is without backplane and power
supply inside chassis. It has a power switch on the front panel. The on-off
switch is suitable for AT power supply such as 310W DC48V. Please plug
the power connector (P8/P9) with the backplane and four wires (Brown,
blue, black, white) with on-off switch to finish the power installation. The
momentary switch is suitable for ATX power supply such as 25Z/30Z/
30R, please plug a 20-pin ATX power connector with backplane first,
then use a orange-white wire (1700030500) to connect between CN#
(PSON_GND_5VSB) of the Backplane and "ATX feature connector"
(CN20) of the SBC. Finally, connect POWER SW wire with "PWR
SW"(CN21) on the SBC to finish the installation.
Figure 2.6: Bare Model