Advantech ACP-2020, User Manual

Page: 3 / 54

iii ACP-2020 User Manual
/ 用户手册
On-line Technical Support
/ 在线技术支持 / 線上技術支
援
For technical support and service, please visit our support website at:
http://support.advantech.com
如需技术支持和服务，请访问研华公司的网站：
http://support.advantech.com.cn
若需技術支援及其它服務，請連結研華公司的支援網站：
http://support.advantech.com.tw
Safety Instructions/
安全指示
1. Read these safety instructions carefully.
2. Keep this user manual for later reference.
3. Disconnect this equipment from AC outlet before cleaning. Do not use liquid or
spray detergents for cleaning.
4. For pluggable equipment, the power outlet shall be installed near the equipment
and shall be easily accessible.
5. Keep this equipment away from humidity.
6. Put this equipment on a reliable surface during installation. Dropping it or letting
it fall could cause damage.
7. Do not leave this equipment in an environment unconditioned where the storage
temperature under 0°C (32°F) or above 40°C (104°F), it may damage the equip-
ment.
8. The openings on the enclosure are for air convection hence protects the equip-
ment from overheating. DO NOT COVER THE OPENINGS.
9. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet.
10. Place the power cord such a way that people can not step on it. Do not place
anything over the power cord. The voltage and current rating of the cord should
be greater than the voltage and current rating marked on the product.
11. All cautions and warnings on the equipment should be noted.
12. If the equipment is not used for long time, disconnect it from the power source to
avoid being damaged by transient over-voltage.
13. Never pour any liquid into ventilation openings. This could cause fire or electri-
cal shock.
14. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
15. If any of the following situations arises, get the equipment checked by service
personnel:
a) The power cord or plug is damaged.
b) Liquid has penetrated into the equipment.
c) The equipment has been exposed to moisture.
d) The equipment does not work well or you cannot get it to work accord-
ing to the user manual.
e) The equipment has been dropped and damaged.
f) The equipment has obvious signs of breakage.