ACP-1000MB User Manual
8
Figure 2.3 Installing the FDD
1.
Undo the three screws then lift off the slim-type ODD and FDD drive bay.
2.
To install the slim-type ODD, please find the small converter board from the
accessory box. Then fasten it onto the slim ODD.
3.
Install slim-type ODD and connect IDE & power cable to IDE kit.
4.
To install the FDD, remove the front cover of the 3.5" bay first. Then insert the
FDD into its proper location and secure it with the screws provided.
5.
To install the internal 3.5" HDD, please remove the HDD bracket out. After fas-
tening the HDD onto the bracket, then return and fasten the whole kit onto the
chassis.
6.
Connect the suitable cables from the motherboard to the 3.5" internal HDD, the
optical disk drive, or FDD. Then, plug the power connector into each disk drive.
Summary of Contents for ACP-1000MB
